440nm 1x2 High Power Large Core Multimode Fiber Coupler

The large core fiber couplers. are used for visible light band splitting. They have excellent performance. Unlike multimode fibers (50/125, 62.5/125) widely used in fiber optic communication systems, large core fibers are usually used to transmit larger laser powers and special working bands. At the same time, due to the large core diameter and high numerical aperture of the fiber, the uniformity and stability of large core fiber splitting are affected by many factors (such as laser mode, laser injection method, etc.). With the accumulation of many years of high-energy laser transmission experimental foundation and the research on the reliability of military devices, we can provide fiber splitters with core diameters of 125um to 1500um, as well as large core fiber splitters working at all wavelengths. The products have extremely high resistance to high-power laser shock and high environmental reliability. Since its establishment, the company has continuously invested in research and development to optimize and improve the melting process of special large core fiber splitters and product packaging processes. We have made breakthroughs in product miniaturization, multi-core optical fiber one-time melting molding, laser mode sensitivity removal, etc. We have provided large-core optical fiber splitter products exclusively to many domestic and foreign customers.

View Now

Single Mode Fiber Collimator 405nm Beam Waist Spot 0.70mm

It is composed of a fiber pigtail and a focusing lens that are precisely positioned and packaged. It can convert the outgoing light from the fiber into a parallel beam (Gaussian beam), or focus and couple the external parallel light into the fiber. It can also be used alone to achieve a light spot of the required size at a specific position according to the established divergence angle.

View Now

C+L Band Erbium-Doped Fiber Amplifier (Module Type) with Saturated Output of 27dBm

C+L band erbium-doped fiber power amplifier (BA amplifier for short) can be used to amplify optical signals in the power range of -6dBm~+3dBm or higher. The maximum saturated output power is 27dBm. It is often used to increase the transmission power of laser light sources. (Erbium-doped Fiber Booster Amplifier for C-band and L-band

View Now

Near infrared TDLAS NH3 (ammonia) ppm level concentration analysis system (1512nm)

TDLAS (Tunable Diode Laser Absorption Spectroscopy) is a new gas detection method developed based on the combination of diode laser and long optical path absorption cell by using laser wavelength modulation to pass through the characteristic absorption area of the gas to be measured. The spectrum of the semiconductor laser light source used in TDLAS technology is much smaller than the broadening of the gas absorption spectrum, and a single-line absorption spectrum is obtained. Therefore, TDLAS technology is a high-resolution absorption spectrum technology. Ammonia: NH3 is a colorless gas with a strong irritating odor, which is lighter than air. This gas usually comes from concrete admixtures used in construction and additives and brighteners in interior decoration materials. Long-term exposure to ammonia will burn the skin, eyes, and respiratory mucosa. If people inhale too much ammonia, it can cause lung swelling and even death.

View Now

1567nm VCSEL Vertical Cavity Surface Emitting Laser 1.0mW

Vertical-Cavity Surface-Emitting Laser (VCSEL) is a semiconductor laser that emits laser light perpendicular to the top surface. It is developed based on gallium arsenide semiconductor materials, which is different from LED (light emitting diode) and LD (laser diode). The structure consists of a mirror, an active layer and a metal contact layer. The two emitting mirrors are P-type and N-type Bragg emitters respectively. The active region is composed of quantum hydrazine, and a metal contact layer is made on the outer surface of the P-type DBR to form an ohmic contact, and a circular outlet is made on the P-type DBR to output the laser. It has a small far-field divergence angle, and the divergence angle beam is narrow and round; and the threshold current is low and the modulation frequency is high, which can reach 300KHz. Wavelength tuning can be achieved by changing the laser current and temperature. It is designed for high-speed fiber optic communication with built-in TEC and PD packaging.

View Now

Wavelength-locked FBG (Fiber Bragg Grating)

Fiber Bragg Gratings have many applications in optical communications, laser technology and sensing systems. FBGs are widely used as fiber reflectors or optical filters with narrowband spectra. FBGs can be used as sensitive elements for strain and temperature measurements.Wavelength Locker FBGs are used as external reflectors for laser diodes. The wavelength generation of pump semiconductor lasers and single frequency lasers is easily stabilized using such fiber gratings. Low reflection gratings with FWHM 0.3 nm – 0.8 nm and reflectivity 2% – 5 % are ideal for pump power laser stabilization. FBGs close to semiconductor laser crystals with FWHM of about 0.1 nm and reflectivity of 10% - 20% are used to create single frequency sources. We present a family of WL FBGs with different accurate wavelength positions up to ± 0.02 nm. The transmission spectrum of the wavelength locked FBGs for laser diode power and wavelength stabilization is shown in the figure.

View Now

InGaAs amplified photodetector 800-1700nm (5MHz)

InGaAs photodetector is a photodetector with a rated bandwidth and fixed gain, designed for detecting optical signals. The optical signal is input through the sensor surface, and the output is provided as a voltage via BNC. This product can measure optical signals in the wavelength range of 800nm to 1700nm. Detailed performance parameters are provided in the appendix table. The PDAM20A6B4G-InGaAs photodetector housing includes mounting holes with a 1/4"-20 threaded pattern for easy installation and fixation. The housing also comes with two different sizes of threaded rings, suitable for both industrial and research applications, enabling easy adaptation to external optical components such as filters, attenuators, lenses, and FC fiber optic adapters. This product includes a plastic dust cover. For specific installation instructions, please refer to Chapter 3. Each photodetector is provided with a ±9V DC linear power supply, with an input rated voltage of 220VAC/50H

View Now

7.2μm Low-Power Benchtop DFB-QCL Mid-Infrared Quantum Cascade Laser (TDLAS Integrated Control Module)

The 7.2μm Low-Power Benchtop DFB-QCL Mid-Infrared Quantum Cascade Laser is the first ultra-low-power QCL DFB laser developed by IdealPhotonics in the first half of 2018. With a tunable range exceeding 100nm and an output power greater than 40mW, it meets the industrial demands for gas sensing and testing applications. Our laser provides collimated output with stable power and exceptional temperature-wavelength stability, surpassing traditional high-power quantum cascade lasers by several orders of magnitude. This makes it an optimal testing light source for customers in mid-infrared applications.

View Now

50:50 2x2 single mode Fiber Coupler 1392nm

The single-mode fiber coupler is a coupler for near-infrared band splitting developed and produced by our single-mode fiber fused taper machine IPCS-5000-SMT. It has excellent performance and can cover the entire communication band (1260-1620nm). At the same time, we can provide customers with more cost-effective narrowband couplers with a central wavelength of 1310nm, 1392nm, 1480nm, 1512nm, 1550nm, 1650nm, 1742nm with a bandwidth of ± 20nm. The maximum power of our coupler with connector or bare fiber is 500mW. We have 50:50, 75:25, 90:10 or 99:1 coupling ratio couplers for customers. Our 2x2 couplers are based on the fused taper process, so they are bidirectional, and any port can be used as the input.

View Now

1030nm Wideband Polarization-Maintaining Passband Fiber Optic Filter (Passband 22nm @ -0.5dB, 1-meter pigtail PM980 fiber, without connector)

Idealphotonics' fiber optic filters use special fiber structures to select or filter out specific wavelengths of light from different light waves. We offer different power versions of filter devices based on customer needs. These can be used in areas such as dense wavelength division multiplexing (DWDM) fiber optic communications, frequency division multiplexing (FDM) fiber optic communications, spectral testing, fiber optic sensors, fiber lasers, and fiber amplifiers. For custom center wavelengths, operating temperatures, or specific working bandwidths, please contact us for customization.

View Now

1000-2600nm Extended Large Photosensitive Surface InGaAs Detector

The photoelectric detection module integrates photodiodes, amplifier circuits and power conditioning circuits in a miniaturized module. It is not only suitable for the construction of various laboratory optical systems, but also suitable for integration in user products. The module is easy to install and can achieve sealing of the optical path. The module can operate with a wide range of positive and negative power supplies. The module contains a linear rectifier circuit to reduce input noise and improve the signal-to-noise ratio. Different types, sizes and speeds of photodiodes are available in the series, such as Si or InGaAs. The typical output characteristics of the module using a 3mm diameter photodiode are ±3V, 0~25MHz (at positive and negative 5V power supplies

View Now

1064nm Single-mode Dual Stage Fiber Isolator (Hi 1060 FC/APC)

Idealphotonics’ fiber isolator products can maintain excellent return optical isolation performance under any polarization state. It has low loss, high isolation, high return loss, low polarization-dependent loss, low polarization mode dispersion, wide operating band and operating temperature range, and no glue in the optical path. These properties provide the possibility for low-cost solutions for communication networks. This series of products can be used in erbium-doped amplifiers, wavelength division multiplexing systems, fiber optic equipment and lasers.

View Now