Silicon Si Avalanche Unit Detector APD Series 400-1100nm

The Si avalanche unit detection module integrates low-noise APD detector, low-noise broadband transimpedance amplifier, ultra-low noise isolation power supply, high voltage power supply, and APD temperature compensation; Isolate the power supply to ensure that the output signal is not affected by external power supply; APD temperature compensation improves the stability of the detection module. Avalanche photodetectors have the characteristics of high gain, high sensitivity, high bandwidth, and low noise

Silicon Si amplification photodetector 320-1100nm (DC-5MHz/200kHz)

A photodetector is a type of photodetector with a rated bandwidth and fixed gain, used for detecting optical signals. The optical signal is input from the sensing surface of the photoelectric sensor and output in the form of voltage through BNC. This product can measure optical signals in the wavelength range of 800nm to 1700nm. Please refer to the attached table for specific performance parameter data. The  idealphotonics  photodetector housing comes with a 1/4 "-20 inch threaded mounting hole for easy installation and fixation. The housing also comes with two different sizes of threaded couplings, which are suitable for industrial and scientific applications, and can be easily adapted to external optical components such as filters, attenuators, lenses, FC fiber optic adapters, etc. This product includes a plastic dust cover. Please refer to Chapter 3 for specific installation instructions. Each photodetector is equipped with a DC linear power supply with an output of ± 9V, and the rated input voltage of this DC power supply is 220VAC/50Hz

200-1100nm silicon-based amplification photodetector - fixed gain

Idealphotonics' silicon-based amplified photodetectors feature a spectral response range covering 200nm to 1100nm with fixed gain. They enable quantitative photoelectric conversion, offering sufficient gain while maintaining high bandwidth performance. These detectors are suitable for developing photoelectric detection applications involving weak optical signals and high speeds. With excellent performance, high cost-effectiveness, and comprehensive technical support, they are commonly used in ultraviolet and visible light measurements.

350-1100nm silicon-based amplification photodetector 190-1100nm silicon-based amplification photodetector - adjustable gain

Idealphotonics' silicon-based amplified photodetectors feature a spectral response range covering 190nm to 1100nm, with 8 adjustable gain settings. They enable quantitative photoelectric conversion and offer a wide dynamic range, making them suitable for various optoelectronic development scenarios. With excellent performance, high cost-effectiveness, and comprehensive technical support, they are commonly used in ultraviolet and visible light measurements.

350-1100nm silicon-based amplification photodetector, photosensitive size 3.6 × 3.6mm, bandwidth range DC~6.7MH

Idealphotonics' silicon-based amplification photodetector covers a photosensitive range of 350nm~1100nm, with a programmable 8-speed adjustable gain that can achieve quantitative photoelectric conversion and a wide dynamic range. It is suitable for various photoelectric development scenarios, with 100% devices produced nationwide, excellent performance, high cost-effectiveness, and provides Quan directional technical support. It is commonly used in visible light and near-infrared light measurements.