1310m polarization-maintaining acousto-optic modulator (operating frequency 100MHz)

Idealphotonics' acousto-optic modulators are widely used in the field of fiber optic sensing due to their high modulation extinction ratio and high power handling. This product is specially developed for the application needs of fiber optic sensing, with the advantages of small size, low power consumption (<1W), fast rise time (12ns), good modulation pulse shape (small overshoot), good pulse repeatability (small repetition period jitter), etc., and the modulator and driver can be packaged in an integrated manner, which is convenient for system integration. It can be widely used in various fiber optic sensing systems that require pulse modulation, such as φ-OTDR, BOTDR, OFDR, etc.

View Now

350-1100nm Silicon-Based Photodetector with Amplification

Idealphotonics' silicon-based amplified photodetector has a sensitive range of 350nm~1100nm, 8 levels of programmable adjustable gain, can achieve quantitative photoelectric conversion, and has a wide dynamic range. It is suitable for various optoelectronic development scenarios. 100% of the devices are domestically produced, with excellent performance and high cost performance. It provides all-round technical support and is often used in visible light and near-infrared light measurement.

View Now

300/340nm Multimode Fiber Connector

VIS-FCL-LMA series large core fiber connectors have excellent performance. Unlike multimode fibers (50/125, 62.5/125) widely used in optical fiber communication systems, large core fibers are usually used to transmit larger laser powers and special working bands. At the same time, due to the large core diameter and high numerical aperture of the optical fiber, the uniformity and stability of the large core fiber splitting are affected by many factors (such as laser mode, laser injection method, etc.). Based on the accumulation of years of high-energy laser transmission experimental foundation and the research on the reliability of military devices, we can provide fiber connector products with core diameters of 125um to 1500um, as well as large core fiber products working at full wavelength. The products have extremely high resistance to high-power laser shock and high environmental reliability. Since its establishment, the company has continuously invested in research and development to optimize and improve the melting process of special large core fiber splitters and product packaging processes. Breakthroughs have been made in product miniaturization, one-time melting and molding of multi-core optical fibers, and removal of laser mode sensitivity. Large core fiber splitter products have been provided to many domestic and foreign customers.

View Now

800-2600nm infrared extended InGaAs amplified photodetector, response time constant 25ns

Idealphotonics' InGaAs Amplified Photodetector with infrared extension covers a sensing range from 800nm to 2600nm. It features 8 adjustable gain levels for quantifiable photoelectric conversion and offers a wide dynamic range. This detector is ideal for various photoelectric development scenarios, providing excellent performance at a high cost-performance ratio. It is commonly used for near-infrared and mid-infrared light measurements.

View Now

2um Fiber Optic Coupler 1x2

The FC series fiber coupler is based on Agiltron's fused biconical taper technology and compact packaging structure. It has excellent uniformity, low excess loss and extremely low polarization sensitivity. The device is ideal for splitting or combining light with excellent performance over a wide wavelength range.

View Now

633nm Narrow linewidth light source module

LDRVUNI is a current driver and temperature control module designed for various types of semiconductor lasers. Its main functions include: controlling the internal temperature of the laser, providing constant current to drive the laser, and converting an external input voltage signal into a current drive. The module has three maximum current driving ranges, suitable for lasers with different power levels, which can be selected via circuit board jumpers. The kit includes: Modular laser controller 50:50 633nm 1x2 polarization-maintaining fiber coupler VIS-FC-W0633-S12-CR5050-1-9-PA 633nm 1-meter long distance fiber collimator NIR-CLM-W633-1-FA (2 pieces) 633nm PM narrow-linewidth laser diode PL-NL-0633-B-A81-PA

View Now

2000nm Single-mode Dual Stage Fiber Isolator

Idealphotonics’ fiber isolator products can maintain excellent return optical isolation performance under any polarization state. It has low loss, high isolation, high return loss, low polarization-dependent loss, low polarization mode dispersion, wide operating band and operating temperature range, and no glue in the optical path. These properties provide the possibility for low-cost solutions for communication networks. This series of products can be used in erbium-doped amplifiers, wavelength division multiplexing systems, fiber optic equipment and lasers.

View Now

2000nm Single-mode Single Stage Fiber Isolator

Idealphotonics’ fiber isolator products can maintain excellent return optical isolation performance under any polarization state. It has low loss, high isolation, high return loss, low polarization-dependent loss, low polarization mode dispersion, wide operating band and operating temperature range, and no glue in the optical path. These properties provide the possibility for low-cost solutions for communication networks. This series of products can be used in erbium-doped amplifiers, wavelength division multiplexing systems, fiber optic equipment and lasers.

View Now

20m long pathlength gas compact absorption cell (1310-1670nm)

The long optical path gas absorption cell can be used for spectral analysis and detection. It mainly adopts the Herriot gas cell structure and a stable optical packaging structure, which mainly includes the gas chamber cavity, concave reflector, standard optical fiber connector, shockproof base and gas inlet and outlet. The unique suspension path design can ensure the vibration and temperature stability of the gas chamber, and can monitor the gas absorption line in real time in various complex environments. It has ultra-low system noise and is convenient for trace gas analysis

View Now

InGaAs avalanche photodiode detector APD-800M-A

The avalanche unit detection module integrates a low-noise APD detector, low-noise broadband transimpedance amplifier, ultra-low noise isolated power supply, high-voltage power supply, and APD temperature compensation. The isolated power supply ensures that the output signal is not affected by external power supply interference. APD temperature compensation improves the stability of the detection module. The avalanche photodetector features high gain, high sensitivity, high bandwidth, and low noise.

View Now

Laser protective goggles 800-1700nm visible light transmittance 40%

Laser safety goggles are a kind of efficient and safe goggles made of polymer materials and light absorbing materials. Its optical safety performance fully meets the European standard EN207A1: 2002. Laser safety goggles are comfortable, beautiful, safe and reliable to wear. They adopt the absorption principle: they are not selective for the incident angle of the light source and can fully protect lasers and strong light in specific bands.

View Now

1550nm 1m long distance fiber collimator single mode

Idealphotonics' fiber collimators are pre-aligned and used to collimate the light emitted from FC/APC-connected fibers with diffraction-limited performance. These fiber collimators have no moving parts and are compact, making them easy to integrate into existing devices. Currently supported operating bands include 532/633/780/850/915/1064/1310/1550nm.

View Now