780nm 30mW Coaxial Packaging Single-Mode Fiber Coupled Laser

The coaxial single-mode fiber coupled laser is a low-loss single-mode fiber coupled laser introduced by Idealphotonics . It features a compact packaging size and high output power. Our products are widely used in laser communication, printing, and laser medical fields.

View Now

Single mode fiber achromatic collimator 1654nm (beam waist spot diameter 2.0mm FC/APC)

Composed of a large numerical aperture lens system, it can use multimode optical fibers with larger numerical apertures. The beam emitted from the multimode fiber can be shaped, or the spatial plane beam can be coupled into the multimode fiber to achieve good collimation and spot shape over long distances.

View Now

Single mode fiber achromatic collimator 1550nm (beam waist spot diameter 3.55mm FC/PC)

Composed of a large numerical aperture lens system, it can use multimode optical fibers with larger numerical apertures. The beam emitted from the multimode fiber can be shaped, or the spatial plane beam can be coupled into the multimode fiber to achieve good collimation and spot shape over long distances.

View Now

916B Piezoelectric Fiber Stretcher/15-20m fiber can be stretched 4mm

The Piezoelectric Fiber Stretcher has a 4mm stretching capability and is capable of fringe scanning and delay line applications. In addition, a small PC smart card on the stretcher provides a driver that can provide up to +150V to the piezoelectric actuator, and is continuously variable. The voltage output of the input signal is set to 0V to +5V.

View Now

1512nm high power single mode DFB laser 20mW (TO39 package NH3 detection)

With optimized optical properties, the 1512nm single-mode DFB is ideal for demanding sensing system applications. The innovative chip design has suppressed high-order longitudinal and transverse modes while providing linear polarization stability. The laser has high output power, narrow linewidth and good consistency and is currently favored by domestic scientific research customers. We currently have in stock wavelength 1512nm DFB for TDLAS oxygen detection, 795nm VCSEL for Rb atomic clock experiments, and 852nm VCSEL for CS atomic cooling.

View Now

780 nm Polarization Maintaining Fiber Optic Connector/Patch Cord

These polarization-maintaining fiber optic patch cords feature high-quality, narrow-key ceramic FC/APC connectors on both ends. Produced by our equipment, each patch cord is individually tested at the test wavelength specified in the specification label, ensuring extinction ratio and low back reflection (return loss) for both the fiber and its connections. These patch cords are in stock, featuring high-quality polishing to guarantee a typical return loss exceeding 60 dB. The test data sheet provides the extinction ratio and insertion loss test results for each patch cord. Each patch cord comes with two protective caps covering the ends to prevent dust or other contaminants from settling on the ferrule end face. We also sell protective FC/PC end caps separately, including CAPF plastic fiber caps and CAPFM metal threaded fiber caps. If you cannot find a suitable product among our in-stock patch cords, Terahertzlabs also offers custom patch cords that can be shipped on the same day.

View Now

633nm single mode fiber optic connector/patch cord

Fiber optic patch cords (also known as fiber optic connectors) are optical cables with connector plugs installed on both ends to achieve active connection of the optical path. Iealphotonics Photonics' fiber optic patch cords have high-quality, narrow-pin ceramic FC/APC connectors on both ends. Produced by our equipment, each patch cord is individually tested at the test wavelength listed in the specification label to ensure the extinction ratio and low back reflection (return loss) when connecting fibers. These patch cords are in stock and have high-quality polishing to ensure a typical return loss of more than 60 dB.

View Now

1550nm 60nm Single Mode Tunable Filter

High-speed tunable bandpass filter. As a two-port optical module, the input port receives broadband multi-wavelength light and only a small portion of the incident signal within the passband is allowed to pass through the filter and directed to the output port. The center wavelength of the selected band can be tuned to anywhere within the operating wavelength range. In our design flexibility, transmission bandwidth, wavelength tuning range can be customized. The voltage-controlled filter requires no moving parts, has fast tuning speed, and is compact and small in size. Our filters are used as suppression filters in optical systems to improve laser signal-to-noise ratio in wavelength scanning engines of optical spectrum analyzers (OSAs) and in system diagnostic communication systems.

View Now

DTS dedicated high-speed data acquisition card (for Phase-OTDR system)

Phase optical time-domain reflectometry (Phase-OTDR) system Low-cost phase optical time-domain reflectometry (Phase OTDR) system DTS dedicated high-speed data acquisition card is a high-speed weak signal data acquisition card. DTS dedicated high-speed data acquisition card adopts the hardware real-time accumulation and averaging technology designed by our company's technological innovation to realize weak signal enhanced acquisition and extract relevant signals submerged by noise. Through on-board synchronization technology, the original signal can be accumulated up to 32768 times, which can increase the signal-to-noise ratio by 180 times. It is a widely used weak signal detection board. DTS dedicated high-speed data acquisition card has two 12-bit high-speed A/D converters on board. According to customer needs, two sampling rate versions of 100MSPS and 125MSPS can be provided. DTS dedicated high-speed data acquisition card has carefully designed a unique parallel synchronous signal acquisition and accumulation technology, so that acquisition and accumulation are completed synchronously. The computer takes only 3 seconds to get the final result after 16,000 acquisitions and accumulations of the original signal with a length of 10,000 points. The DTS dedicated high-speed data acquisition card has two trigger modes: external trigger and internal trigger. Customers can choose the device trigger acquisition card mode or the acquisition card trigger device mode. After careful signal integrity processing, the trigger pulse overshoot given by the device is within 5%, and the superior signal quality ensures that the device is not triggered by mistake. The DTS dedicated high-speed data acquisition card can accurately recover, detect and measure weak signals submerged by noise background, and is particularly suitable for distributed fiber optic sensing systems.

View Now

1064nm 60nm Single Mode Tunable Filter

High-speed tunable bandpass filter. As a two-port optical module, the input port receives broadband multi-wavelength light and only a small portion of the incident signal within the passband is allowed to pass through the filter and directed to the output port. The center wavelength of the selected band can be tuned to anywhere within the operating wavelength range. In our design flexibility, transmission bandwidth, wavelength tuning range can be customized. The voltage-controlled filter requires no moving parts, has fast tuning speed, and is compact and small in size. Our filters are used as suppression filters in optical systems to improve laser signal-to-noise ratio in wavelength scanning engines of optical spectrum analyzers (OSAs) and in system diagnostic communication systems.

View Now

633nm single mode fiber isolator

Idealphotonics' visible light isolator products can maintain excellent return light isolation performance under any polarization state. It has low loss, high isolation, high return loss, low polarization-dependent loss, low polarization mode dispersion, wide operating band and operating temperature range, and no glue in the optical path. These properties provide the possibility of low-cost solutions for communication networks. This series of products can be used in RGB system research, fiber optic equipment and lasers. Our pigtails have better optical performance with the help of our SM600 single-mode optical fiber and HB600 polarization-maintaining optical fiber. The excellent performance makes it more compatible with our 633nm single-mode polarization-maintaining fiber coupler.

View Now

1310nm 60nm Single Mode Tunable Filter

High-speed tunable bandpass filter. As a two-port optical module, the input port receives broadband multi-wavelength light and only a small portion of the incident signal within the passband is allowed to pass through the filter and directed to the output port. The center wavelength of the selected band can be tuned to anywhere within the operating wavelength range. In our design flexibility, transmission bandwidth, wavelength tuning range can be customized. The voltage-controlled filter requires no moving parts, has fast tuning speed, and is compact and small in size. Our filters are used as suppression filters in optical systems to improve laser signal-to-noise ratio in wavelength scanning engines of optical spectrum analyzers (OSAs) and in system diagnostic communication systems.

View Now