InGaAs Ultra Low Noise PIN Detector Module 100M

The high-speed low-noise photoelectric unit detection module integrates a low-noise analog PIN detector, a low-noise broadband transimpedance amplifier and an ultra-low noise isolation power supply. The output signal is not affected by the external power supply and has the characteristics of high gain, high sensitivity, high bandwidth and low noise.

View Now

Pulsed Erbium Doped Fiber Amplifier Modular EDFA 1528.77-1565.05nm

The pulse EDFA module can maintain the complete waveform when amplifying the reference signal. The product can work in ACC/APC/AGC mode and adopts highly feasible temperature control technology, so that the product has good thermal performance in a wide temperature range. It has been widely used in fiber optic sensing, wind measurement lidar, hydrophone systems and other fields.

View Now

Mach-Zehnder interferometer 1225-1375nm

The Mach-Zehnder interferometer is used in scanning OCT systems. It contains a fixed-arm difference MZI and a low-noise photoelectric balanced detector. The balanced detector in the module is used to provide the K clock signal. Different wavelengths and different arm differences can be customized according to different customer needs. The module is designed with shock absorption and heat insulation to ensure the stability of the module to the maximum extent.

View Now

900um large core energy transmission optical fiber

We are currently able to provide international commercial-level quartz energy optical fibers in batches. Our energy optical fibers include two categories: quartz cladding type high-performance energy optical fibers and plastic cladding type high-performance energy optical fibers. Quartz cladding type energy optical fibers can transmit higher laser power, have good resistance to optical damage, as well as lower attenuation and higher light transmittance (from near ultraviolet band to near infrared band 400nm ~ 1600nm).

View Now

IR Polished KRS5 Thallium Bromide Iodide Window 42mm Ø x 3mm

KRS5, a deep infrared material with a high refractive index, is widely used in ATR prisms, windows, and lens spectroscopy. When combined with germanium, KRS5 can also be utilized in athermalized IR imaging systems. KRS-5 is produced using the sealed Stockbarger crystal growth technique. The highest purity starting materials are selected to ensure no anionic absorption bands between 2 μm and 16 μm, and the quality of all crystals is verified using a 120mm path length. Note: Thallium salts are considered toxic and should be handled with care.

View Now

980nm 420mW Modular Light Source (with Isolator)

Idealphotonics’Cobrite series 980nm high-stability single-mode pump source utilizes a single-mode semiconductor laser with an FBG wavelength-stabilizing grating, offering wavelength stability and high output power. Based on an advanced microprocessor control system combined with high-precision ATC and ACC (APC) control circuits, it achieves highly stable laser output while ensuring quick and intuitive operation of the light source. We can also provide corresponding communication interfaces and control software based on user requirements to enable computer control. This light source features a Turn-Key pump laser protection function to effectively prevent user errors. It supports coarse power adjustment (50mW steps) and fine power adjustment (0.1mW steps). Idealphotonics’ Cobrite series 980nm single-mode pump source is a high-stability pump source designed for applications such as high-power fiber amplifiers and mode-locked fiber lasers. Since ASE light generated by active fibers can easily damage the pump laser, Idealphotonics’ provides targeted pump protection solutions to further enhance the safety of the pump source. Idealphotonics’ Cobrite series 980nm single-mode pump source is a highly integrated benchtop system light source with a high-definition LCD display, continuously adjustable output power, and synchronous current and voltage display, making it ideal for experimental scientific research and production testing. Additionally, the company can provide modular packaging based on user needs for easy system integration.

View Now

IR Polished KRS5 Thallium Bromide Iodide Window 25mm Ø x 2mm

KRS5, a deep infrared material with a high refractive index, is widely used in ATR prisms, windows, and lens spectroscopy. When combined with germanium, KRS5 can also be utilized in athermalized IR imaging systems. KRS-5 is produced using the sealed Stockbarger crystal growth technique. The highest purity starting materials are selected to ensure no anionic absorption bands between 2 μm and 16 μm, and the quality of all crystals is verified using a 120mm path length. Note: Thallium salts are considered toxic and should be handled with care.

View Now

Microstructured Multi-core Sensing Fiber (Hydrogen Corrosion Resistant, Pure Quartz, Mode Field Diameter @ 1550nm: 3μm

Compared to conventional step-index optical fibers, specially designed microstructured optical fibers offer ultra-low loss, improved optical modes, hydrogen corrosion resistance, and a single-material composition (pure silica, without doping). These superior characteristics significantly enhance the sensitivity of distributed optical fiber sensing systems, system stability, spatial measurement accuracy, and fiber lifespan. The fiber structure and parameters can be customized for production.

View Now

IR Polished KRS5 Thallium Bromide Iodide Window 13mm Ø x 2mm

KRS5 deep infrared material has a high refractive index and is widely used in ATR prisms, windows and lenses for spectroscopy. In combination with germanium, KRS5 can also be used in heat-free IR imaging systems. KRS-5 is grown using sealed Stockbarger crystal growth technology. The highest purity starting material is selected to ensure the absence of anionic absorption bands between 2 μm and 16 μm, and all crystals are checked for quality by using a path length of 120mm. Caution: Thallium salts are considered toxic and should be handled with care.

View Now

980nm 420mW Modular Light Source

Idealphotonics’Cobrite series 980nm high-stability single-mode pump source utilizes a single-mode semiconductor laser with an FBG wavelength-stabilizing grating, offering wavelength stability and high output power. Based on an advanced microprocessor control system combined with high-precision ATC and ACC (APC) control circuits, it achieves highly stable laser output while ensuring quick and intuitive operation of the light source. We can also provide corresponding communication interfaces and control software based on user requirements to enable computer control. This light source features a Turn-Key pump laser protection function to effectively prevent user errors. It supports coarse power adjustment (50mW steps) and fine power adjustment (0.1mW steps). Idealphotonics’ Cobrite series 980nm single-mode pump source is a high-stability pump source designed for applications such as high-power fiber amplifiers and mode-locked fiber lasers. Since ASE light generated by active fibers can easily damage the pump laser, Idealphotonics’ provides targeted pump protection solutions to further enhance the safety of the pump source. Idealphotonics’ Cobrite series 980nm single-mode pump source is a highly integrated benchtop system light source with a high-definition LCD display, continuously adjustable output power, and synchronous current and voltage display, making it ideal for experimental scientific research and production testing. Additionally, the company can provide modular packaging based on user needs for easy system integration.

View Now

Swept tunable laser module

The scanning semiconductor laser module of Idealphotonics is an adjustable laser module based on independent intellectual property rights. It has the characteristics of precise wavelength, stable power and fast scanning speed. It is widely used in fiber grating demodulation systems and optical passive device test systems.

View Now

Near infrared Fabry Perot (F-P) interferometer/F-P standard/multibeam interferometer 1.3-2.0um

Fabry-Perot interferometer is a multi-beam interferometer composed of two parallel glass plates. The inner surfaces of the two glass plates have high reflectivity. When the two glass plates are fixed with a hollow spacer of fixed length, it is also called Fabry-Perot etalon or simply etalon. The F-P (Fabry-Perot) etalon is a high-resolution spectrometer because of its high reflectivity and extremely narrow multi-beam isotonic interference fringes. It can be used for high-resolution spectroscopy and the study of spectral lines with very close wavelengths, such as isotope spectra of elements, hyperfine structures of spectra, tiny frequency shifts during light scattering, Doppler shifts of spectral lines caused by atomic movement, and the structural shape inside spectral lines; it can also be used as a high-resolution optical filter and the construction of precision wavelength meters; in laser systems, it is often used to narrow spectral lines in the cavity or to make the laser system run in single mode. It can be used as a bandwidth control and tuning device in broadband picosecond lasers to analyze and detect spectral (longitudinal mode, transverse mode) components in lasers.

View Now