780nm 1X2 Polarization Maintaining Fiber Coupler

Idealphotonics’s 780nm fiber coupler can couple the optical signal transmitted in the optical fiber in the coupling area of the special structure, redistribute the optical power, and can be monitored in real time as needed. Fused taper splitters are widely used in fiber lasers, communication systems and OCT systems.

View Now

1030nm In-line Polarizer Hi1060 fiber

Idealphotonics’In-line Polarizer is designed to pass a specified polarization and block other polarizations. Its function is to convert unpolarized light into linearly polarized light to achieve a high extinction rate. It is also used to improve the extinction rate of precision measurement systems, fiber optic sensors, high-speed test instruments, etc. We have designed an in-line polarizer specifically for the ring gyro system, and its components are tested under full temperature conditions. In addition, its mini size is very suitable for our cost-effective fiber optic gyro system

View Now

1.0~2.6 um extended InGaAs photodiode

This is a photosensitive component specifically designed for detecting the short-wave infrared band. It overcomes the 1.7 µm response limit of standard InGaAs detectors, extending the detection range to 2.6 µm, thereby covering more critical near-infrared spectral regions

View Now

24.3m Nanosecond Fiber Delay Line

Compact, low-loss fiber coils made by Idealphotonics requires attention, precision, and skill. Our F-TDC Compact time delay coils feature a proprietary manufacturing process that provides extremely low insertion loss while fitting your budget and small space.

View Now

2.28m Nanosecond Fiber Delay Line

Compact, low-loss fiber coils made by Idealphotonics requires attention, precision, and skill. Our F-TDC Compact time delay coils feature a proprietary manufacturing process that provides extremely low insertion loss while fitting your budget and small space.

View Now

C-band gain flat Erbium-doped fiber amplifier(PA-GF PM 14dbm Module FC/APC)

The gain-flattened erbium-doped fiber amplifier is specially used in fiber laser or fiber communication systems. It can simultaneously amplify multiple wavelength signals in the C band and keep the gain between each wavelength consistent. The gain flatness is ≤1.5 dB. It has the ability to simultaneously amplify multiple wavelengths in a wide spectrum, as well as the advantages of gain flatness, adjustable gain, high gain and low noise

View Now

C-band gain-flattened erbium-doped fiber amplifier(BA-GF SM 26dbm Module FC/APC)

The gain-flattened erbium-doped fiber amplifier is specially used in fiber laser or fiber communication systems. It can simultaneously amplify multiple wavelength signals in the C band and keep the gain between each wavelength consistent. The gain flatness is ≤1.5 dB. It has the ability to simultaneously amplify multiple wavelengths in a wide spectrum, as well as the advantages of gain flatness, adjustable gain, high gain and low noise

View Now

11.1m Nanosecond Fiber Optic Delay Line

Idealphotonics’ manufacturing compact and low-loss fiber optic coils requires attention, precision, and skill. Our F-TDC compact time delay coils feature a proprietary manufacturing process that provides extremely low insertion loss while meeting your budget and small space requirements.

View Now

C-band gain-flattened erbium-doped fiber amplifier(BA-GF PM 26dbm Module FC/APC)

The gain-flattened erbium-doped fiber amplifier is specially used in fiber laser or fiber communication systems. It can simultaneously amplify multiple wavelength signals in the C band and keep the gain between each wavelength consistent. The gain flatness is ≤1.5 dB. It has the ability to simultaneously amplify multiple wavelengths in a wide spectrum, as well as the advantages of gain flatness, adjustable gain, high gain and low noise

View Now

C-band gain-flattened erbium-doped fiber amplifier(BA-GF PM 23/25dbm Module FC/APC)

The gain-flattened erbium-doped fiber amplifier is specially used in fiber laser or fiber communication systems. It can simultaneously amplify multiple wavelength signals in the C band and keep the gain between each wavelength consistent. The gain flatness is ≤1.5 dB. It has the ability to simultaneously amplify multiple wavelengths in a wide spectrum, as well as the advantages of gain flatness, adjustable gain, high gain and low noise

View Now

Ultra-low noise polarization diversity coherent receiver module 300M

The ultra-low noise polarization diversity receiver module is designed for polarization-sensitive optical fiber sensing applications. This polarization diversity receiver module coherently detects the two polarization states of the local oscillator and signal light separately, using two high-speed low-noise balanced detectors for individual reception. It effectively solves the issue of coherent polarization states. This series is an upgrade based on the original PDR series, significantly reducing the background noise, thereby achieving higher signal-to-noise ratio for detection.

View Now

1550nm 1X10 Single- Mode Fiber Coupler Module

Idealphotonics' 1550nm single-mode fiber coupler module uses a single-mode fiber that is tapered multiple times, which effectively reduces the insertion loss of our module.

View Now