1G InGaAs Balance Photodetector

The high-speed low-noise photoelectric balanced detector module integrates two matched low-noise analog PIN detectors, a low-noise broadband transimpedance amplifier and an ultra-low noise power supply. It has the characteristics of high gain, high sensitivity, high bandwidth, low noise, high common mode rejection ratio, etc. It can effectively reduce the common mode noise of the signal and improve the signal-to-noise ratio of the system.

View Now

C-band gain-flattened erbium-doped fiber amplifier(BA-GF PM 17/20dbm Module FC/APC)

The gain-flattened erbium-doped fiber amplifier is specially used in fiber laser or fiber communication systems. It can simultaneously amplify multiple wavelength signals in the C band and keep the gain between each wavelength consistent. The gain flatness is ≤1.5 dB. It has the ability to simultaneously amplify multiple wavelengths in a wide spectrum, as well as the advantages of gain flatness, adjustable gain, high gain and low noise

View Now

100M InGaAs Balance Photodetector

The high-speed low-noise photoelectric balanced detector module integrates two matched low-noise analog PIN detectors, a low-noise broadband transimpedance amplifier and an ultra-low noise power supply. It has the characteristics of high gain, high sensitivity, high bandwidth, low noise, high common mode rejection ratio, etc. It can effectively reduce the common mode noise of the signal and improve the signal-to-noise ratio of the system.

View Now

200M InGaAs Balance Photodetector

The high-speed low-noise photoelectric balanced detector module integrates two matched low-noise analog PIN detectors, a low-noise broadband transimpedance amplifier and an ultra-low noise power supply. It has the characteristics of high gain, high sensitivity, high bandwidth, low noise, high common mode rejection ratio, etc. It can effectively reduce the common mode noise of the signal and improve the signal-to-noise ratio of the system.

View Now

400M InGaAs Balance Photodetector

The high-speed low-noise photoelectric balanced detector module integrates two matched low-noise analog PIN detectors, a low-noise broadband transimpedance amplifier and an ultra-low noise power supply. It has the characteristics of high gain, high sensitivity, high bandwidth, low noise, high common mode rejection ratio, etc. It can effectively reduce the common mode noise of the signal and improve the signal-to-noise ratio of the system.

View Now

5.57m Nanosecond Fiber Delay Line

Compact, low-loss fiber coils made by Idealphotonics requires attention, precision, and skill. Our F-TDC Compact time delay coils feature a proprietary manufacturing process that provides extremely low insertion loss while fitting your budget and small space.

View Now

Si Balanced Photodetector 1GHz, 400-1100nm, FC/APC

The Si balanced detector module integrates two matched low-noise analog PIN detectors, a low-noise broadband transimpedance amplifier and an ultra-low noise power supply. It has the characteristics of high gain, high sensitivity, high bandwidth, low noise, high common mode rejection ratio, etc. It can effectively reduce the common mode noise of the signal and improve the signal-to-noise ratio of the system.

View Now

Si Balanced Photodetector 500MHz, 400-1100nm, FC/APC

The Si balanced detector module integrates two matched low-noise analog PIN detectors, a low-noise broadband transimpedance amplifier and an ultra-low noise power supply. It has the characteristics of high gain, high sensitivity, high bandwidth, low noise, high common mode rejection ratio, etc. It can effectively reduce the common mode noise of the signal and improve the signal-to-noise ratio of the system.

View Now

Si balanced photodetector 400MHz, 400-1100nm, FC/APC

Si Balanced detector module integrates two matched low-noise analog PIN detectors, low-noise broadband transimpedance amplifiers, and ultra-low-noise power supplies. It features high gain, high sensitivity, high bandwidth, low noise, and high common-mode rejection ratio, which can effectively reduce common-mode noise in the signal and improve the system's signal-to-noise ratio.

View Now

C-band gain-flattened erbium-doped fiber amplifier(BA-GF SM 26dbm Benchtop FC/APC)

The gain-flattened erbium-doped fiber amplifier is specially used in fiber laser or fiber communication systems. It can simultaneously amplify multiple wavelength signals in the C band and keep the gain between each wavelength consistent. The gain flatness is ≤1.5 dB. It has the ability to simultaneously amplify multiple wavelengths in a wide spectrum, as well as the advantages of gain flatness, adjustable gain, high gain and low noise

View Now

Integral Sphere Power Meter

This is an integrating sphere optical power meter, operating in the range of 700 to 1700 nm, with 21 calibration wavelengths. It uses an integrating sphere probe to measure optical power in the range of 1 μW to 20 W, and features a separated external probe structure and display main unit. The device is characterized by fast data acquisition speed, high measurement accuracy, and good repeatability. It is equipped with built-in USB and RS232 communication interfaces, allowing remote control through upper-level software to build an automated testing platform

View Now

Full wavelength (200nm-12um) middle and far infrared laser thermal sensitivity card /UV laser thermal sensitivity card

Laser thermal induction card is a thermal induction film specially cut and processed by Idealphotonics from Honywell, USA. It is 1.3 times the size of ordinary bank loan cards. Because it is suitable for ultraviolet and mid-to-far infrared laser detection, it is widely used in the field of education and scientific research for optical path calibration. We fill the gap of ordinary laser display cards (800-1700nm). At the same time, it has the advantage of high sensitivity and can detect low-power output lasers.

View Now