3.348um Low Power Benchtop ICL-DFB Tunable Continuous Wave Laser 5mW (with TDLAS Phase-Locked Control Module)

The MP-ICL-3348-DFB-5-T laser is a tunable continuous-wave laser developed by Idealphotonics . It features a narrow linewidth, high power, and low power consumption, making it ideal for gas sensing tests, especially for detecting hydrocarbons and other related gases. Additionally, the benchtop ICL-DFB laser module integrates a driver and temperature control module. It can be controlled via software to adjust the laser’s temperature and operating current, ensuring stable operation and maintaining measurement accuracy. The laser module also includes an optional FPGA (available for an additional fee) to facilitate the processing of gas concentration measurements.

View Now

Aspheric Fiber Collimator 1550nm

The light output of the pigtail is polished at an angle and coated with an anti-reflection film to reduce the return light at the light output end. The long-focus collimator uses a bent housing to accommodate the light output angle caused by the tilted pigtail; the short-focus collimator can ignore the light output angle caused by the tilted pigtail, and these models use a straight-through housing. The other end of the pigtail has a narrow-key FC/PC, FC/APC and SMA905 connector with a standard; various spot diameters and non-magnetic packaging can also be customized.

View Now

Adjustable Focus Aspheric Fiber Collimator 1050-1700nm (Focal Length 11mm Beam Waist Diameter 2.1 FC/APC)

The design uses springs to assemble a suitable optical lens inside the mechanical part, which is used for the collimator output of the optical fiber beam and can also be used for fiber-to-fiber coupling. By rotating the sleeve outside the collimator, the internal optical lens can be translated forward and backward along the optical axis, thereby adjusting the distance between the lens and the end face of the optical fiber to obtain different spot sizes.

View Now

400-1100nm Si Balance Photodetector 1GHz

The high-speed low-noise balance photodetector module, a low-noise broadband transimpedance amplifier and an ultra-low noise power supply. It has the characteristics of high gain, high sensitivity, high bandwidth, low noise, high common mode rejection ratio, etc. It can effectively reduce the common mode noise of the signal and improve the signal-to-noise ratio of the system.

View Now

400-1100nm Si Balance Photodetector 500MHz

The high-speed low-noise balance photodetector module, a low-noise broadband transimpedance amplifier and an ultra-low noise power supply. It has the characteristics of high gain, high sensitivity, high bandwidth, low noise, high common mode rejection ratio, etc. It can effectively reduce the common mode noise of the signal and improve the signal-to-noise ratio of the system.

View Now

C-band gain-flattened erbium-doped fiber amplifier(BA-GF SM 23/25dbm Module FC/APC)

The gain-flattened erbium-doped fiber amplifier is specially used in fiber laser or fiber communication systems. It can simultaneously amplify multiple wavelength signals in the C band and keep the gain between each wavelength consistent. The gain flatness is ≤1.5 dB. It has the ability to simultaneously amplify multiple wavelengths in a wide spectrum, as well as the advantages of gain flatness, adjustable gain, high gain and low noise

View Now

4.240μm low power benchtop ICL-DFB tunable continuous wave laser 5mW (with TDLAS phase-locking control module)

The MP-ICL-4240-DFB-5-T laser is a tunable continuous-wave laser developed by Idealphotonics . It features a narrow linewidth, high power, and low power consumption, making it ideal for gas sensing applications, particularly for testing hydrocarbons and other related gases. The benchtop ICL-DFB laser module integrates a driver and temperature control module, and also allows software-based control of the laser's temperature and operating current, ensuring stable operation and maintaining the accuracy of measurement values. Additionally, the module includes an FPGA (optional, at extra cost), facilitating the processing of gas concentration measurements.

View Now

C-band gain flat Erbium-doped fiber amplifier(PA-GF PM 14dbm Benchtop FC/APC)

The gain-flattened erbium-doped fiber amplifier is specially used in fiber laser or fiber communication systems. It can simultaneously amplify multiple wavelength signals in the C band and keep the gain between each wavelength consistent. The gain flatness is ≤1.5 dB. It has the ability to simultaneously amplify multiple wavelengths in a wide spectrum, as well as the advantages of gain flatness, adjustable gain, high gain and low noise

View Now

Polarization-Maintaining Fiber Collimator 780nm (Working Distance 100mm)

It is composed of polarization-maintaining fiber pigtail and focusing lens with precise positioning and packaging, which can transform the outgoing light of fiber transmission into parallel beam (Gaussian beam), or focus and couple the parallel light from the outside into the fiber. It can be used alone to achieve the specified size spot at the required position; it can also be used in pairs, adding filters, isolators and other optical components between a pair of probes to achieve the purpose of customer use. In the interferometric fiber sensor based on optical coherence detection, the use of polarization-maintaining fiber can ensure that the linear polarization direction remains unchanged, improve the coherent signal-to-noise ratio, and achieve high-precision measurement of physical quantities.

View Now

915nm high power benchtop single mode pumped FBG wavelength stable light source

Our modular laser control is based on an advanced microprocessor control system, combined with high-precision ATC and ACC (APC) control circuits to achieve high stability of laser output, while ensuring that the light source is quick and intuitive to operate. We can also provide corresponding communication interfaces and control software according to user requirements to achieve computer control. This light source uses a one-key recovery function (Run/Stop button), which can effectively help customers return to the previous working state. This is a highly integrated modular system light source, which uses PC-side software intelligent control. Customers can set the required working temperature and current according to their needs. It is very suitable for experimental scientific research and production testing. In addition, we need to modulate the laser for some application fields. We have connected two modulation ports, one for high frequency and one for low frequency, to better meet customers' needs for multiple uses of one machine.

View Now

400-1100nm Si Balance Photodetector 350MHz

The high-speed low-noise balance photodetector module，integrates two matched ultra-low noise analog PIN detectors, a low-noise broadband transimpedance amplifier and an ultra-low noise power supply. It has the characteristics of high gain, high sensitivity, high bandwidth, low noise, high common mode rejection ratio, etc. It can effectively reduce the common mode noise of the signal and improve the signal-to-noise ratio of the system.

View Now

400-1100nm Si Balance Photodetector 200MHz

The high-speed low-noise balance photodetector module, a low-noise broadband transimpedance amplifier and an ultra-low noise power supply. It has the characteristics of high gain, high sensitivity, high bandwidth, low noise, high common mode rejection ratio, etc. It can effectively reduce the common mode noise of the signal and improve the signal-to-noise ratio of the system.

View Now