- Cart
- |
- Personal Center
- |


1550±10nm 10mW 5kHz Single‑Mode Output Narrow Linewidth Laser Module
This narrow linewidth laser module offers excellent performance and reliability (compliant with Telcordia GR‑468). With output power up to 30 mW, very low relative intensity noise (RIN), ultra‑low phase noise and narrow linewidth, particularly good wavelength stability, and strong resistance to vibration, the package is designed with customer needs in mind: high integration, small footprint, and self‑contained module.
Product features:Ultra‑low phase noise and relative intensity noise (RIN);Low sensitivity to vibration and acoustic noise;Narrow linewidth (<1 kHz), long coherence length;1530 nm – 1565 nm, ITU‑T DWDM wavelengths or custom;Mode‑hop free over lifetime and temperature range;Excellent wavelength stability over lifetime and temperature
Part Number:MP-NL-1550-10-10-5k-PA-M
Application area:Acoustic and seismic sensing | Defense and security | Oil & gas exploration and production | Lidar and remote sensing | Interferometric fiber sensing | Metrology
Add to Cart Request for Quotation Consult Favorite
Output Power Center Wavelength Linewidth Fiber Connector
10 mW 1550 ± 10 nm < 5 kHz FC/APC

parameter | value | unit |
output power | 10-30 | mW |
Central wavelength (ITU grid and custom) | 1530-1565 | nm |
Heat wavelength tuning range | 30 | pm |
Relative intensity noise, ≥500 kHz | Granular noise limitation | dB/Hz |
Polarization extinction ratio (polarized fiber) | ≥20 | dB |
Frequency Modulation Bandwidth (High Frequency) | DC-200 | MHz |
working temperature | 0~+70 | ℃ |
Light Isolation Degree | ≥40 | dB |
Line width and phase noise specification
sFor the recommended TEC setting temperature T and bias current Ib
parameter | symbol | condition | Grade 1 | Grade 3 | Grade 4 | Grade 5L | unit |
line width FWHM¹ | △λL | - | ≤15 | ≤5 | ≤2 | ≤1 | KHz |
Phase noise (typical) ² | PhN | @10Hz | 123 | 41 | 20 | 20 | μrad/rt-Hz 1m OPD |
@200Hz | 22 | 8 | 4 | 4 |
1. Numerical results based on the Lorentz broadening model.
2. Measured using interferometric phase noise tester for a 1-meter optical path length (OPD) in the SM fiber.
3. Current output power is 10 mW.
product features
Test Spectrum

Phase Noise Curve

Intensity-Noise Curve
Model Description
--
Request for Quotation
We will reply to all your information about the product in time.
⇪