- Cart
- |
- Personal Center
- |


794.978 nm DBR Laser Diode
The 794.978 nm Distributed Bragg Reflector (DBR) high-performance edge-emitting laser diode is fabricated based on monolithic integrated single-frequency Gallium Arsenide (GaAs) laser technology.This series of diodes outputs single spatial mode laser beams, with passivated cavity facet design to guarantee device reliability. The 794.978 nm DBR device is applied for rubidium (Rb) atomic spectral analysis and quantum sensing fields. It has passed spectral certification, which can precisely match the D1 transition spectral line of rubidium within the temperature range of room temperature ±10 °C.
Product features:Precise matching with atomic energy level transition;Excellent spectral performance;Professional package and integrated control interface
Part Number:MP-DBR-794.978-60-14BF-PA
Application area:Rubidium Atomic Quantum Technology & Precision Physics | High-Resolution Spectroscopy
Add to Cart Request for Quotation Consult Favorite
Center Wavelength
794.978nm

Detailed parameters

794.978nm DBR Chip Carrier Package (CoS) Characteristics
Chip structure | |||
Parameter 1 | HOT3 | Low power | High power |
Nominal wavelength (nm)2 | 794.978 ± 0.6 | ||
Power range | 10-30 | 40-80 | 80-180 |
Maximum Operating Current (CW & Pulse) (mA) | 80 | 140 | 250 |
Maximum Operating Current Hour Power (mW) | 30 | 80 | 180 |
Nominal Slope Efficiency (W/A) | 0.6 | 0.9 | 0.85 |
Nominal threshold current (mA) | 30 | 30 | 60 |
1. Unless otherwise stated, all characteristics are measured at a case temperature (TC) of 25°C. Operating outside of these parameters will void the warranty.
2. The sealed package may contain a chip carrier (CoS) with a wavelength deviation of ±1.2 nm from the nominal value.
3. The high-temperature (HOT) characteristic parameter is performed at 65°C.
Available free-space encapsulation add-ons

Parameters
Laser
Parameters | unit | Minimum | Typical values | Maximum |
Storage temperature | ℃ | 0 | - | 70 |
Shell operating temperature | ℃ | 5 | - | 70 |
The laser chip operating temperature is 1 | ℃ | 5 | - | 45 |
Laser series resistance | Ω | - | 2 | - |
Laser forward voltage @LIV current | V | - | 2 | - |
Laser line width, typical @LIV current | kHz | - | 500 | - |
Beam Divergence Angle @FWHM (θ|| x θ⊥) | º | - | 6x28 | 8 x 32 |
Edge-mode rejection ratio (SMSR) | dB | - | -40 | - |
Polarization extinction ratio | dB | -17 | -20 | - |
Polarized state of the laser | TE | |||
Pattern structure | Fundamental mode | |||
Temperature tuning rate | nm/℃ | - | 0.06 | - |
Current tuning rate | nm/mA | - | 0.002 | - |
Laser reverse voltage | V | - | - | 0 |
1. If the package is not sealed, it is not recommended to work in an environment below the dew point
Free space encapsulation add-ons
Parameters | unit | Minimum | Typical values | Maximum |
Photodiode forward current | mA | - | - | 10 |
Photodiode reverse voltage | V | - | - | 50 |
TEC Current (TOSA) | A | -1.1 | - | 1.1 |
TEC Voltage (TOSA) | V | -3.0 | - | 3.0 |
TEC Current (TO-8) | A | -1.8 | - | 1.8 |
TEC Voltage (TO-8) | V | -2.2 | - | 2.2 |
Thermistors | kΩ | - | 10 | - |
Handling Precautions
These devices are sensitive to ESD. When handling the module, grounded work area and wrist strap must be used. Always store in an antistatic container with all leads shorted together.



--
Request for Quotation
We will reply to all your information about the product in time.
⇪