300M InGaAs Balance Photodetector

The high-speed low-noise photonic balanced detector module integrates two matched low-noise analog PIN detectors, a low-noise broadband transimpedance amplifier, and an ultra-low-noise power supply. It features high gain, high sensitivity, high bandwidth, low noise, and a high common-mode rejection ratio (CMRR), effectively reducing common-mode noise in the signal and improving the system's signal-to-noise ratio (SNR).

View Now

980-1064nm Polarization-Maintaining Taper Wavelength Division Multiplexer FC/APC

Idealphotonics' tapered wavelength division multiplexing products for optical communications have the advantages of low loss, low polarization-dependent loss, wide operating band and operating temperature range, and no glue in the optical path. This series of products can be used in wavelength division multiplexing systems, fiber optic sensing systems, and fiber optic optical detection equipment.

View Now

Ultra long distance collimating lens 525nm (5KM focal length 400mm FC/PC)

The optical fiber output is collimated and reshaped into a large spot, suitable for high-power, long-distance transmission, and pulsed output lasers. Within the operating range, the light exhibits excellent collimation, with a uniform energy distribution and sharp, clear edges. The design adopts a multi-lens series with air gaps, compatible with single-mode, multi-mode, and large-core optical fibers, enabling functions such as remote sensing, illumination, and interference.

View Now

980-1030nm Single-Mode Taper Wavelength Division Multiplexer FC/APC

Idealphotonics' tapered wavelength division multiplexing products for optical communications have the advantages of low loss, low polarization-dependent loss, wide operating band and operating temperature range, and no glue in the optical path. This series of products can be used in wavelength division multiplexing systems, fiber optic sensing systems, and fiber optic optical detection equipment.

View Now

Ultra-long distance collimating lens 525nm (3KM focal length 320mm SMA905)

The optical fiber output is collimated and reshaped into a large spot, suitable for high-power, long-distance transmission, and pulsed output lasers. Within the operating range, the light exhibits excellent collimation, with a uniform energy distribution and sharp, clear edges. The design adopts a multi-lens series with air gaps, compatible with single-mode, multi-mode, and large-core optical fibers, enabling functions such as remote sensing, illumination, and interference.

View Now

Ultra long distance collimating lens 525nm (3KM focal length 320mm FC/PC)

The optical fiber output is collimated and reshaped into a large spot, suitable for high-power, long-distance transmission, and pulsed output lasers. Within the operating range, the light exhibits excellent collimation, with a uniform energy distribution and sharp, clear edges. The design adopts a multi-lens series with air gaps, compatible with single-mode, multi-mode, and large-core optical fibers, enabling functions such as remote sensing, illumination, and interference.

View Now

Ultra long distance collimating lens 525nm (3KM focal length 320mm FC/APC)

The optical fiber output is collimated and reshaped into a large spot, suitable for high-power, long-distance transmission, and pulsed output lasers. Within the operating range, the light exhibits excellent collimation, with a uniform energy distribution and sharp, clear edges. The design adopts a multi-lens series with air gaps, compatible with single-mode, multi-mode, and large-core optical fibers, enabling functions such as remote sensing, illumination, and interference.

View Now

1550nm Single-mode Fiber Collimator (20mm Working Distance)

The fiber collimator from Idealphotonics is pre-aligned and designed to collimate light emitted from an FC/APC connector fiber, with diffraction-limiting performance. These fiber collimators have no moving parts, are compact in structure, and can be easily integrated into existing systems.

View Now

780nm AR-coated fiber optic patch cord

Fiber patch cords (also known as fiber connectors) are optical cables with connector plugs installed on both ends to achieve active connection of optical paths. Both ends of our fiber patch cords are high-quality, narrow-pin ceramic FC/AFC connectors. The fiber end faces of this fiber patch cord are coated with anti-reflection coating. Produced by our equipment, each patch cord is individually tested at the test wavelength listed on the specification label to ensure the extinction ratio and low back reflection (return loss) when connecting fibers to fibers.

View Now

1060nm ASE broadband light source 10mW

The 1060nm band ASE broadband light source is based on ytterbium-doped fiber and semiconductor pump laser, with a spectrum covering 1030~1080nm, and can also be extended to 1010nm and 1100nm bands, with high output power and good flatness. It can be used for fiber device testing, FBG grating production, etc.

View Now

Anti-Resonant Hollow Core Fibers

Optical signal in hollow core anti-resonant fibers propagates in an air core surrounded by single ring of anti-resonant tube elements. Guidance is based on an anti-resonance from the thin glass membranes constituted by the non-touching tubes surrounding the hollow core. The extremely low overlap of guided power with the surrounding silica, less than 2x10-5, added to the mode effective area, confers to these fibers design record material non-linearity.

View Now

1550nm Single Mode Standard Fiber Coupler Mini

Idealphotonics' mini 1x2 (2x2) single-window broadband fiber couplers provide high performance and high reliability over broadband with precise optical signal splitting ratios in a small or sub-miniature package. These couplers have excellent uniformity, low loss, and very low polarization sensitivity, and are available in a variety of splitting ratios, wavelength ranges, fiber types, and connector options. All devices can handle high optical powers up to 4W and are tested according to industry standard procedures. Reliability is guaranteed through rigorous testing to fully meet the requirements of Telcordia GR-1221. We can provide custom designs to meet specialized functional applications. We also offer full environmental testing options. This is a special option for fiber optic systems in aerospace grade applications.

View Now