1020nm 30mW SM DFB laser diode with isolator

Distributed Feedback (DFB) and Distributed Bragg Reflector (DBR) laser diodes are light sources emitting an extremely narrow spectral line with a bandwidth below 5 MHz and a typical Side-Mode Suppression Ratio (SMSR) > 40 dB. Based on GaAs, idealphotonics' DFB and DBR lasers utilize InGaAs Quantum Well (QW) or InAs/GaAs Quantum Dot (QD) active regions and proprietary chip designs, covering the 970–1330 nm spectral range.To date, DFB and DBR lasers are common laser types, especially for use in scientific research and operations. Both laser types operate in a single longitudinal mode and are highly reliable in terms of efficiency, spectral purity, and long-term performance across various applications.

View Now

968nm 30mW DFB laser diode

Distributed Feedback (DFB) and Distributed Bragg Reflector (DBR) laser diodes are light sources emitting an extremely narrow spectral line with a bandwidth below 5 MHz and a typical Side-Mode Suppression Ratio (SMSR) > 40 dB. Based on GaAs, Idealphotonic's DFB and DBR lasers utilize InGaAs Quantum Well (QW) or InAs/GaAs Quantum Dot (QD) active regions and proprietary chip designs, covering the 970–1330 nm spectral range.To date, DFB and DBR lasers are common laser types, especially for use in scientific research and operations. Both laser types operate in a single longitudinal mode and are highly reliable in terms of efficiency, spectral purity, and long-term performance across various applications.

View Now

760.8nm 6mW TO5 DFB laser diode

760.8 nm DFB laser diodes are used for oxygen detection.

View Now

635nm 20mW TO56 Laser Diode

Ridge Waveguide Laser Diode for 635nm Wavelength

View Now

655nm 20mW PM FP Laser Diode

655nm FP is a single-mode laser diode module designed specifically for optical measurement and communication. The laser adopts a standard 14-pin butterfly package, with a built-in monitoring photodiode (PD) and thermoelectric cooler (TEC), and is coupled to PM Fiber. The pigtail of this module is 0.7-1.0m single-mode polarization-maintaining fiber, with an FC/APC connector interface.

View Now

633nm 20mW PM FP Laser Diode

633nm FP is a single-mode laser diode module designed specifically for optical measurement and communication. The laser adopts a standard 14-pin butterfly package, with a built-in monitoring photodiode (PD) and thermoelectric cooler (TEC), and is coupled to PM Fiber. The pigtail of this module is 0.7-1.0m single-mode polarization-maintaining fiber, with an FC/APC connector interface.

View Now

520nm 20mW SM FP Laser Diode

520nm FP is a single-mode laser diode module designed specifically for optical measurement and communication. The laser adopts a standard 14-pin butterfly package, with a built-in monitoring photodiode (PD) and thermoelectric cooler (TEC), and is coupled to PM Fiber. The pigtail of this module is 0.7-1.0m single-mode polarization-maintaining fiber, with an FC/APC connector interface.

View Now

520nm 20mW PM FP Laser Diode

520nm FP is a single-mode laser diode module designed specifically for optical measurement and communication. The laser adopts a standard 14-pin butterfly package, with a built-in monitoring photodiode (PD) and thermoelectric cooler (TEC), and is coupled to PM Fiber. The pigtail of this module is 0.7-1.0m single-mode polarization-maintaining fiber, with an FC/APC connector interface.

View Now

488nm 20mW SM FP Laser Diode

488nm FP is a single-mode laser diode module designed specifically for optical measurement and communication. The laser adopts a standard 14-pin butterfly package, with a built-in monitoring photodiode (PD) and thermoelectric cooler (TEC), and is coupled to PM Fiber. The pigtail of this module is 0.7-1.0m single-mode polarization-maintaining fiber, with an FC/APC connector interface.

View Now

488nm 20mW PM FP Laser Diode

488nm FP is a single-mode laser diode module designed specifically for optical measurement and communication. The laser adopts a standard 14-pin butterfly package, with a built-in monitoring photodiode (PD) and thermoelectric cooler (TEC), and is coupled to PM Fiber. The pigtail of this module is 0.7-1.0m single-mode polarization-maintaining fiber, with an FC/APC connector interface.

View Now

450nm 20mW SM FP Laser Diode

450nm FP is a single-mode laser diode module designed specifically for optical measurement and communication. The laser adopts a standard 14-pin butterfly package, with a built-in monitoring photodiode (PD) and thermoelectric cooler (TEC), and is coupled to PM Fiber. The pigtail of this module is 0.7-1.0m single-mode polarization-maintaining fiber, with an FC/APC connector interface.

View Now

450nm 20mW PM FP Laser Diode

450nm FP is a single-mode laser diode module designed specifically for optical measurement and communication. The laser adopts a standard 14-pin butterfly package, with a built-in monitoring photodiode (PD) and thermoelectric cooler (TEC), and is coupled to PM Fiber. The pigtail of this module is 0.7-1.0m single-mode polarization-maintaining fiber, with an FC/APC connector interface.

View Now