1083nm benchtop with software control DFB laser 10mW

Idealphotonics' benchtop software-controlled DFB light source is based on an advanced microprocessor control system, combined with high-precision ATC and ACC (APC) control circuits to achieve high and stable output of the laser, while ensuring that the light source is quick and intuitive to operate. We can also provide corresponding communication interfaces and control software according to user requirements to achieve computer control. This light source uses a one-key recovery function (Run/Stop button), which can effectively help customers return to the previous working state. This is a highly integrated modular system light source, which uses PC-side software intelligent control. Customers can set the required working temperature and current according to their needs. It is very suitable for experimental scientific research and production testing. In addition, we need to modulate the laser for some application fields. We have connected two modulation ports, one for high frequency and one for low frequency, to better meet customers' needs for multiple uses of one machine.

View Now

1550nm High Power Single Mode Fiber Laser 3W

With optimized optical properties, 1550nm single-mode DFB is an ideal choice for demanding sensing system applications. The innovative chip design has suppressed high-order longitudinal and transverse modes while maintaining linear polarization stability. The laser has high output power (Max. 50W output), narrow line width and good consistency, and is currently favored by domestic scientific research customers. At present, our existing inventory wavelengths cover 1000-2400nm. For certain specific areas of use of customers, we can provide customers with customized chip screening services.

View Now

320-1000nm Silicon-based Amplified Photodetector, Active area Φ0.8mm

The Silicon-based Amplified Photodetector from IdealPhotonics covers a wavelength range of 200nm to 1100nm, featuring fixed gain for quantitative photoconversion. It provides sufficient gain while ensuring high bandwidth performance, making it suitable for the development of photodetection applications involving weak light intensity and fast speeds. It delivers excellent performance and high cost-efficiency, along with Quan-level technical support. Commonly used in ultraviolet (UV) and visible light measurement.

View Now

Si APD Photodetector 500MHz 400-1100nm FC/APC

The Si APD Photodetector module integrates a low-noise APD detector, a low-noise broadband transimpedance amplifier, an ultra-low noise isolated power supply, a high-voltage power supply, and APD temperature compensation; the isolated power supply ensures that the output signal is not affected by the external power supply; the APD temperature compensation improves the stability of the detection module. The avalanche photodetector has the characteristics of high gain, high sensitivity, high bandwidth, and low noise

View Now

FBG WDM ITU Filter 100/200GHz Wavelength Division Multiplexing Fiber Bragg Grating

FBGs with narrow spectral bandwidth are excellent components for filtering optical signals. This type of FBG is widely used as an optical add/drop multiplexer in WDM systems. Allow high-level SLSR to avoid adjacent channel crosstalk in the system. The flat top reflection spectrum and steep spectral drop are characteristics of these FBGs. Stable operation requires non thermal encapsulated FBGs with wavelength stability<0.16 nm within the temperature range of 0-70 ℃

View Now

MEMS 1x32 Optical Switch (Module Package)

Idealphotonics' MEMS 1x32 optical switch is an optical switch based on MEMS (micro-electromechanical system) technology that allows channel selection between a single input light and 32 output lights. It has the characteristics of small size, long life and stable reliability, and is widely used in optical network fields such as OADM and OXC.

View Now

FBG Fabry-Perot interferometer fiber Bragg grating 600-2300nm

Fiber Bragg Grating is currently one of the hotspots in the field of fiber optic sensing research. For many applications that require measuring very small temperature or strain changes, using fiber Bragg gratings can improve acoustic sensitivity. The fiber Fabry Perot interferometer is such a pair of fiber Bragg gratings. In this case, a small phase shift can be detected. By coating the optical fibers between gratings with electrical, magnetic, or acoustic enhancement coatings, small changes in these fields can be measured. For sensing purposes and evaluating small vibrations or acoustic signals through interferometry, using low precision is usually sufficient. Transmission spectra of Fabry Perot cavity. The Fabry Perot fiber interferometer is shown in the figure.

View Now

600-1750nm InGaAs quadrant photodiode

The MP-QPD-B-I-W3 series is a product line with high sensitivity and high reliability, making it ideal for optical communication equipment. This model is also available with custom packaging options.

View Now

532nm polarization-maintaining fiber attenuator

Based on our unique optical design and processing capabilities, our VOA has the characteristics of fast adjustment of optical attenuation, small size, low insertion loss, low polarization-related loss, high mode-related stability and high reliability. It is mainly used in multimode transmission networks, power balancing, product testing, and related instruments and equipment.

View Now

300M InGaAs Balance Photodetector

The high-speed low-noise photonic balanced detector module integrates two matched low-noise analog PIN detectors, a low-noise broadband transimpedance amplifier, and an ultra-low-noise power supply. It features high gain, high sensitivity, high bandwidth, low noise, and a high common-mode rejection ratio (CMRR), effectively reducing common-mode noise in the signal and improving the system's signal-to-noise ratio (SNR).

View Now

980-1064nm Polarization-Maintaining Taper Wavelength Division Multiplexer FC/APC

Idealphotonics' tapered wavelength division multiplexing products for optical communications have the advantages of low loss, low polarization-dependent loss, wide operating band and operating temperature range, and no glue in the optical path. This series of products can be used in wavelength division multiplexing systems, fiber optic sensing systems, and fiber optic optical detection equipment.

View Now

Ultra long distance collimating lens 525nm (5KM focal length 400mm FC/PC)

The optical fiber output is collimated and reshaped into a large spot, suitable for high-power, long-distance transmission, and pulsed output lasers. Within the operating range, the light exhibits excellent collimation, with a uniform energy distribution and sharp, clear edges. The design adopts a multi-lens series with air gaps, compatible with single-mode, multi-mode, and large-core optical fibers, enabling functions such as remote sensing, illumination, and interference.

View Now