筱晓光子

All Categories

Home >

Ytterbium doped fiber ASE light source

X-band ASE light source 1000nm, 13dBm (>20mW)

By using ytterbium doped quartz fiber and ytterbium doped fluoride fiber, FiberLabs provides three ASE light sources with different spectral characteristics in the X-band (1000 nanometer band). These are excellent light sources for the development and evaluation of 1000 nm wavelength fiber laser components and other 1000 nm wavelength optical devices.

Product PN#	product name	Working wavelength	Output power	Other parameters

1060nm ASE broadband light source

The 1060nm ASE broadband light source is based on ytterbium doped fiber and semiconductor pump laser, with a spectral coverage of 1030-1080nm, which can also be extended to 1010nm and 1100nm bands, while having high output power and good flatness. Can be used for fiber optic device testing, FBG grating production, etc

Product PN#	product name	Working wavelength	Output power	Fiber optic connector	Other parameters

980nm ASE light source (output power+10dBm)

ASE-0980-10 is an ASE light source in the 980nm wavelength range. This light source can be used to evaluate optical isolators and other 980nm band optical devices. The total output power is greater than 10dBm.

Product PN#	product name	Center wavelength	Output power	Other parameters

1 μ m broadband light source (based on ASE)

Xiaoxiao Photon's OEBLS-100 is a broadband light source (CW) based on the principle of amplified spontaneous emission (ASE), using laser pumped ytterbium doped fiber. There are different working modes in the range of 1020-1060 nm. This is a very stable fiber optic light source, which is very suitable for FBG sensing demodulation systems or component testing. This product has two versions: Turn Key and OEM. The low-cost OEM version can be installed inside your product, requiring only a 5V power supply.

Product PN#	product name	Center wavelength	Average power	Bandwidth (-10 dB)	Type	Other parameters