COMPANY INFO

LINKED

1064nm(1.0um) High Power Single-Frequency Polarization Maintaining Ytterbium Fiber Amplifier
Category: Fiber Amplifier  Publish Time: 2016-10-07 21:03 

1064nm(1.0um) High Power Single-Frequency Polarization Maintaining Ytterbium Fiber  Amplifier
Price : $0.00
Delivery Fee : $0.00
Quantity :
 Part NO. : IDP-Yb-10xx-B-PW-SF:PM
 Datasheet :
 Availability :  In store

1064nm(1.0um) High Power Single-Frequency Polarization Maintaining Ytterbium Fiber  Amplifier      



Description

The high power single frequency polarization maintaining fiber amplifiers of Idealphotonics Laser are designed specifically for the ultra-narrow linewidth single frequency laser source, such as the fiber lasers based on the principle of DFB or DBR. This kind of amplifiers has the capability of boosting the low power optical signal at kHz magnitude up to 50W output power and preserves the spectral property of the input signal. The amplifiers use high power high performance multi-mode pump internally, employ the technology of double cladding fiber amplification, and have the integrated design of all polarization-maintaining structure. The output power can be continuously tuning. MARS series fiber amplifiers are integral Turn-Key system with the microprocessor inside for controlling. The front panel is equipped with the switch to start the laser, the LCD to display the state of the power and the knob to adjust the output power.
Thanks to the extensive experience of handling the double cladding fiber, Idealphotonics Laser conducts proper optimal design to the high power polarization maintaining fiber amplifiers, thus achieving high efficiency output while suppressing the nonlinear effects of the fiber. The unique thermal treatment technology guarantees that the desktop fiber amplifier can operate stably for a long time. The high-speed response protection circuit monitor the power of input and output signal automatically so that it can cut down the operation of the high power pump in case of the falling off of the input signal, thus ensures the safety of the whole system.
This high power desktop polarization-maintaining fiber amplifiers of Idealphotonics Laser can be widely used in scientific research, coherent beam combining, coherent detection sensing system, etc.

Applications
● Test and measurement 
● Spectroscopy
● Gas Sensor
● Biomedical Application
● Other science research

Features

● High peak output power: 0.5W~50W
● Low noise figure
● Turn-Key system
● Total PM fiber structure, high PER
● High stability, high reliability
 

Specifications 

Parameter

Unit

Specification

Min

Typ.

Max

Part NO.

 

IDP-Yb-10xx-SF

Operating wavelength1

nm

1035

1064

1083

Input power2

mW

1~10

10~50

50~200

Output power3

W

0.5

-

50

Input Isolation

dB

30

-

-

Output Isolation

dB

30

-

-

Output power tunable range

%

2

-

100

Polarization Extinction Ratio(PER)

dB

15

20

-

Output power stability4(8h)

%

-

±1

±2

Beam quality

M2

<1.2

Input fiber type

 

PM980

Output fiber type

 

PM980 or other

Length of the output fiber

m

>1

Optical connectors

 

FC/APC((other options available)

Power supply

VAC

170

220

260

Power consumption

W

-

-

150

Operation temperature

0

-

30

Storage temperature

-40

-

+85

Dimension

mm

420(L)×485(W)×105(H)

Cooling mode

 

Air-Cooled

1.Typical operating wavelength: 1053nm、1064nm、1083nm;
2.The input power is related to the output power;
3.Typical Output power: 0.5W、1W、10W、50W;
4.The output power stability is measured under 25℃, 30minites after warm-up.

Spectrum:

Ordering Information:

IDP-Yb-10xx-B-PW-SF:PM
10xx:Operating wavelength in nm, example:1053nm、1064nm、1083nm
B:B-Benchtop
PW:Output power in W,  example:0.5-0.5W、1-1W、10-10W
SF:Single Frequen

Related Items:


1310nm Superluminescent Diode

High Sensitivity PIN-FET

 Receiver Module

ICS-4000 PM Fiber Fused Biconic

 Tapering System